How To Plunge A Toilet According To The Plumber In Boca Raton
Posted in General Plumbing Services, on February 23, 2022
It’s something that everyone has to deal with at least once in their lives: How do you plunge a toilet?
All plumbers in Boca Raton, Florida, will tell you that the most common way to fix a clogged toilet is to use a plunger. Plunging a toilet is a simple process for any plumber in Boca Raton, and when done correctly by following Broward Plumbing's Advice you can be saved from having to call a plumbing company in Broward County. If you have a standard plunger, you put the business end of it into the toilet as far as you can with the suction cup end resting on the floor of the toilet. You then work the plunging mechanism up and down repeatedly, thus creating a suction effect that will “plunge” whatever is clogging your drain.
If you are struggling to plunge your toilet. And after a few plunge attempts, the toilet still won't flush, this article is for you. Our plumbers in Boca Raton, Florida, have included some basic tips for plunging toilets to help you no matter what the reason for your toilet clog may be. If your clogged toilet, persists feel free to contact our plumbing company in Boca Raton!
The Art Of The Plunge
Plungers are a tried and true method to break up clogs in your toilet. Many plumbing companies in Boca Raton and the surrounding Broward County prefer to plunge over other methods because plunging does not cause any damage to the toilet. There are many ways to plunge a toilet, but it all starts with the right equipment. If you don't have the right equipment, plunging can be difficult or even impossible.
You may be required to call an emergency plumber in Boca Raton.
How To Plunge A Toilet
1. Turn Off Water
While it might seem simple enough, there are some basic steps you have to take before you begin plunging. First and foremost, turn off the water supply to your toilet. This is so you don’t accidentally send water spewing all over the place when you plunge.
2. Get the right type of plunger.
There are a variety of plungers that exist with differing shapes and angles. There are three types of plungers the standard plunger, the flanged plunger and the beehive plunger.
- Standard Plunger
The standard plunger is one of the most common types of plungers. It has one piece and two cups with a rubber or silicone cup on the end. When you push down on the plunger, air trapped inside the cup pushes against the water in your drain, creating a pressure that will force the clog to move up through the pipe and out of your sink.
- Beehive Plunger
The beehive plunger is for sinks where there is limited space around it and sinks with drainage problems. It looks like a small wine glass but flat with a long stem coming from the bottom. When pressing down on this plunger, it will make contact with various parts of your sink instead of just being in contact with the drain itself.
- Flange Plunger
A flanged plunger is a straight plunger with a hollow cup that is bent on one side. This is the best type of plunger to use on clogged toilets.
3. Plunge The Toilet
Plunging a toilet is simply a quick flush with a plunger, which takes much less water than a full toilet flush. Plunging breaks up the clog, removing all the water and allowing you the opportunity to remove it by hand.
To plunge, attach the plunger to your toilet and push down on the handle. This creates suction in the toilet bowl directly underneath your plunger. If you have a shallow bowl (which can more easily be clogged), you may want to place a bucket underneath the plunger as well to catch any water that is loosened as you plunge. Once you have created suction, begin pulling up on the handle of your plunger until any trapped water drains from the bowl. You can then continue plunging until all of the remaining water and clog are gone.
Once all of the remaining water has drained from your toilet, use the toilet brush to remove whatever clog there may still be in your toilet. With remaining clog removed, flush your toilet once more to check for any other clogs or if another plunge is necessary.
5. Clean Plunger
Don't forget to clean the plunger thoroughly. This is something that people often forget to do.
In order to clean the plunger, you can use hot water and a good detergent or bleach to clean it out. Make sure that there is no residue left on the plunger head that may cause damage to your toilet when plunging next time. Put your plunger back together and store it in a dry place so that it can air dry completely.
Avoid A Clogged Toilets By Reading:
When you need a top-level plumbing company, turn to Broward Plumbing. Every Plumber in Boca Raton is qualified and experienced, and we use advanced technology to provide high-quality solutions. Can’t unclog your toilet yourself? Contact us to schedule a visit from one of our plumbers in Boca Raton.